AN ARCHITECTURAL APPROACH FOR REDUCINGPOWER AND INCREASING SECURITY OF RFID TAGS

Radio Frequency Identification (RFID) technology is currently employed for a variety of applications such as RFID-based wireless payment, healthcare, homeland security, asset management,etc. Due to newer privacy requirements and increasingly secure applications, typical RFID tags are required to expand security features such as data encryption and safe transactions. However, RFID tags have extremely strict low-power consumption requirements. Thus, reduced power consumption and secure data transactions are two main problems for the next generation RFID tags.This dissertation presents an architectural approach to address these two main problems.This dissertation provides a multi-domain solution to improve the power consumption andsecurity, while also reducing design time and verification time of the system. In particular, Idescribe (1)a smart buffering technique to allow a tag to remain in a standby mode until addressed,(2)a multi-layer, low-power technique that transcends the passive-transaction, physical, and data layers to provide secure transactions, (3) an FPGA-based traffic profiler system to generate traces of RFID communications for both tag verification and power analysis without the need of actual hardware, and (4) a design automation technique to create physical layer encoding and decoding blocks in hardware suitable for RFID tags.This dissertation presents four contributions: (1) As a result, based on a Markov Process energymodel, the smart buffering technique is shown to reduce power consumption by 85% over a traditionalactive tag; (2) The multi-layer, low-power security technique provides protection againstmalicious reader attacks to disable the tag, to steal the information stored in or communicatedto the device. The power consumption overhead for implementing these layers of security is increased approximately 13% over the basic tag controller; (3) In addition, the FPGA-based traffic profiler system has been able to generate traces for ISO 18000 part 6C (EPC Gen2) protocol; and (4) The designs of endocing/decoding blocks are generated automatically by the Physical LayerSynthesis tool for five protocols used in or related to RFID. Consequently, any power consumption of five designs is less than 5 £gW. Furthermore, compared with five designs implemented by hand, the difference of the power consumption between two of them is less than 7% at most

Temperature Swing Adsorption Process for CO2 Capture Using Polyaniline Solid Sorbent

AbstractTo capture carbon dioxide from power plant flue gas which consists of 15% CO2 and 85% N2, with a temperature swing adsorption (TSA) by using polyaniline solid sorbent as the adsorbent, is explored experimentally and theoretically. First, single component adsorption equilibrium data of carbon dioxide on polyaniline solid sorbent is obtained by using Micro-Balance Thermo D-200. Then isotherm curves and the parameters are obtained by numerical method. The adsorption is expressed by the Langmuir-Freundlich isotherm. After accomplishment of isotherm curves, the breakthrough curve experiment is investigated with single adsorption column. The experiments test the change in adsorbed gas concentration at the outlet by adsorbed gas, CO2, and non-adsorbed gas, helium. Finally, this study accentuates the TSA experiments on CO2 purity and recovery by operation variable discussion which includes feed pressure, adsorption temperature and desorption temperature to find optimal operation condition. The results of optimal operation condition are CO2 purity of 47.65% with a 92.46% recovery

Rate adaptation for 802.11 multiuser mimo networks

In multiuser MIMO (MU-MIMO) networks, the optimal bit rate of a user is highly dynamic and changes from one packet to the next. This breaks traditional bit rate adaptation algorithms, which rely on recent history to predict the best bit rate for the next packet. To address this problem, we introduce TurboRate, a rate adaptation scheme for MU-MIMO LANs. TurboRate shows that clients in a MU-MIMO LAN can adapt their bit rate on a per-packet basis if each client learns two variables: its SNR when it transmits alone to the access point, and the direction along which its signal is received at the AP. TurboRate also shows that each client can compute these two variables passively without exchanging control frames with the access point. A TurboRate client then annotates its packets with these variables to enable other clients to pick the optimal bit rate and transmit concurrently to the AP. A prototype implementation in USRP-N200 shows that traditional rate adaptation does not deliver the gains of MU-MIMO WLANs, and can interact negatively with MU-MIMO, leading to low throughput. In contrast, enabling MU-MIMO with TurboRate provides a mean throughput gain of 1.7x and 2.3x, for 2-antenna and 3-antenna APs respectively.National Science Council (China) (contract No. NSC 100-2221-E-001-005-MY2)National Science Foundation (U.S.) (NSF Grant CNS-1117194

Expression of PRDX6 Correlates with Migration and Invasiveness of Colorectal Cancer Cells

Background/Aims: Colorectal cancer (CRC) is the third most common type of cancer and the second leading cause of cancer-related deaths worldwide. PRDXs are antioxidant enzymes that play an important role in cell differentiation, proliferation and apoptosis and have diverse functions in malignancy development. However, the mechanism of aberrant overexpression of PRDX6 in CRC remains unclear. Methods: Boyden chamber assay, flow cytometry and a lentiviral shRNA targeting PRDX6 and transient transfection with pCMV-6-PRDX6 plasmid were used to examine the role of PRDX6 in the proliferation capacity and invasiveness of CRC cells. Immunohistochemistry (IHC) with tissue array containing 40 paraffin- embedded CRC tissue specimens and Western blot assays were used to detect target proteins. Results: PRDX6 was significantly up-expressed in different comparisons of metastasis of colorectal adenomas in node-positive CRC (P = 0.03). In in vitro HCT-116, PRDX6 silencing markedly suppressed CRC cell migration and invasiveness while also inducing cell cycle arrest as well as the generation of reactive oxygen species (ROS); specific overexpression of PRDX6 had the opposite effect. Mechanistically, the PRDX6 inactivation displayed decreased levels of PRDX6, N-cadherin, β-catenin, Vimentin, Slug, Snail and Twist-1 through the activation of the PI3K/ AKT/p38/p50 pathways, but they were also significantly inhibited by PRDX6 transfectants. There was also increased transcriptional activation of dimethylation of histone H3 lysine 4 (H3K4me3) of PRDX6 promoter via the activation of the PI3K/Akt/NFkB pathways. Conclusion: Our findings demonstrated that PRDX6 expression plays a characteristic growth-promoting role in CRC metastasis. This study suggests that PRDX6 may serve as a biomarker of node-positive status and may have a role as an important endogenous regulator of cancer cell tumorigenicity in CRC. PRDX6 may also be an effective therapeutic target

Differential Differences in Methylation Status of Putative Imprinted Genes among Cloned Swine Genomes

DNA methylation is a major epigenetic modification in the mammalian genome that regulates crucial aspects of gene function. Mammalian cloning by somatic cell nuclear transfer (SCNT) often results in gestational or neonatal failure with only a small proportion of manipulated embryos producing live births. Many of the embryos that survive to term later succumb to a variety of abnormalities that are likely due to inappropriate epigenetic reprogramming. Aberrant methylation patterns of imprinted genes in cloned cattle and mice have been elucidated, but few reports have analyzed the cloned pig genome. Four surviving cloned sows that were created by ear fibroblast nuclear transfer, each with a different life span and multiple organ defects, such as heart defects and bone growth delay, were used as epigenetic study materials. First, we identified four putative differential methylation regions (DMR) of imprinted genes in the wild-type pig genome, including two maternally imprinted loci (INS and IGF2) and two paternally imprinted loci (H19 and IGF2R). Aberrant DNA methylation, either hypermethylation or hypomethylation, commonly appeared in H19 (45% of imprinted loci hypermethylated vs. 30% hypomethylated), IGF2 (40% vs. 0%), INS (50% vs. 5%), and IGF2R (15% vs. 45%) in multiple tissues from these four cloned sows compared with wild-type pigs. Our data suggest that aberrant epigenetic modifications occur frequently in the genome of cloned swine. Even with successful production of cloned swine that avoid prenatal or postnatal death, the perturbation of methylation in imprinted genes still exists, which may be one of reason for their adult pathologies and short life. Understanding the aberrant pattern of gene imprinting would permit improvements in future cloning techniques

Plio-Pleistocene sea level and temperature fluctuations in the northwestern Pacific promoted speciation in the globally-distributed flathead mullet Mugil cephalus

<p>Abstract</p> <p>Background</p> <p>The study of speciation in the marine realm is challenging because of the apparent absence of physical barriers to dispersal, which are one of the main drivers of genetic diversity. Although phylogeographic studies using mitochondrial DNA (mtDNA) information often reveal significant genetic heterogeneity within marine species, the evolutionary significance of such diversity is difficult to interpret with these markers. In the northwestern (NW) Pacific, several studies have emphasised the potential importance of sea-level regression during the most recent glaciations as a driver of genetic diversity in marine species. These studies have failed, however, to determine whether the period of isolation was long enough for divergence to attain speciation. Among these marine species, the cosmopolitan estuarine-dependent fish <it>Mugil cephalus </it>represents an interesting case study. Several divergent allopatric mtDNA lineages have been described in this species worldwide, and three occur in sympatry in the NW Pacific.</p> <p>Results</p> <p>Ten nuclear microsatellites were surveyed to estimate the level of genetic isolation of these lineages and determine the role of sea-level fluctuation in the evolution of NW Pacific <it>M. cephalus</it>. Three cryptic species of <it>M. cephalus </it>were identified within this region (NWP1, 2 and 3) using an assignment test on the microsatellite data. Each species corresponds with one of the three mtDNA lineages in the COI phylogenetic tree. NWP3 is the most divergent species, with a distribution range that suggests tropical affinities, while NWP1, with a northward distribution from Taiwan to Russia, is a temperate species. NWP2 is distributed along the warm Kuroshio Current. The divergence of NWP1 from NWP2 dates back to the Pleistocene epoch and probably corresponds to the separation of the Japan and China Seas when sea levels dropped. Despite their subsequent range expansion since this period of glaciation, no gene flow was observed among these three lineages, indicating that speciation has been achieved.</p> <p>Conclusions</p> <p>This study successfully identified three cryptic species in <it>M. cephalus </it>inhabiting the NW Pacific, using a combination of microsatellites and mitochondrial genetic markers. The current genetic architecture of the <it>M. cephalus </it>species complex in the NW Pacific is the result of a complex interaction of contemporary processes and historical events. Sea level and temperature fluctuations during Plio-Pleistocene epochs probably played a major role in creating the marine species diversity of the NW Pacific that is found today.</p

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals &lt;1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Large expert-curated database for benchmarking document similarity detection in biomedical literature search

Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency-Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research.Peer reviewe

Smart Control of Home Appliances Using Hand Gesture Recognition in an IoT-Enabled System

Recently, with the vigorous development of the Internet of Things (IoT) technology, all kinds of intelligent home appliances in the market are constantly innovating. The public requirements for residential safety and convenience are also increasing. Meanwhile, with the improvement of indigenous medical technology and quality of life, people’s average lifespan is gradually increasing. However, countries around the world are facing the problem of aging societies. Hand gesture recognition is gaining popularity in the fields of gesture control, robotics, or medical applications. Therefore, how to create a convenient and smart control system of home appliances for the elderly or the disabled has become the objective of this study. It aims to use Google MediaPipe to develop a hand tracking system, which detected 21 key points of a hand through the camera lens of a mobile device and used a vector formula to calculate the angle of the intersection of two lines based on four key points. After the angle of bending finger is obtained, users’ hand gesture can be recognized. Our experiments have confirmed that the recognition precision and recall values of hand gesture for numbers 0–9 reached 98.80% and 97.67%, respectively; and the recognition results were used to control home appliances through the low-cost IoT-Enabled system